Change Track Octave Setting; Save - Yamaha PortableGrand DGX-300 Owner's Manual

Disk Operations
Change the Track Octave Setting for a Disk Song Track
When a disk song is playing and the note data exceeds the limit of
A-1 – C7 (DGX-500), E0 – G6 (DGX-300), an "OVER" indication
flashes and Q or W appears in the display. If this happens, you can adjust
the track octave setting of the relevant track up or down to compensate.
1
Select the Track Octave function.
Press the right Overall button, until "OCTAVE" appears in the display
2
Change the Track Octave setting.
To set a positive octave value, press the number button, 0, 1, or 2.
To set a negative value, simultaneously hold down the [-] button and press the
appropriate number button, 1 or 2.

Save

You can save User songs (song #201 - #205) to floppy disks.
1
Insert a formatted floppy disk.
2
Press the [SAVE] button.
76
0
s--
Indicates new file name
001
• The Track Octave setting can
only be changed when the Song
is stopped.
• If the [SAVE] button is pressed
• When the floppy disk's write-pro-
when there is no floppy disk
inserted into the disk drive, a "No
disk" message appears at the top
of the display, and all disk opera-
tions will be disabled.
tect tab is set to ON ( page 74) or
the disk is a purposely "copy-pro-
tected" disk, a "Protect" mes-
sage appears, indicating that the
Save function is not possible.