I Rear Panel - Yamaha PortableGrand DGX-300 Owner's Manual

!9
[SYNC STOP] button
This turns the Sync Stop function on and off. (See page
43.)
@0
[SYNC START] / [PAUSE] button
This turns the Sync Start function on and off. (See page
40.) In the Song mode, it is used to temporarily pause song
playback. (See page 59.)
@1
[START/STOP] button
When the Style mode is selected, this alternately starts and
stops the style. (See page 39.) In the Song mode, this alter-
nately starts and stops song playback. (See page 58.)
@2
[INTRO ENDING] / [
When the Style mode is selected, this is used to control the
Intro and Ending functions. (See page 39.) When the Song
mode is selected, this is used as a "rewind" control, or
move the song playback point back toward the beginning.
@3
[MAIN/AUTO FILL] / [FF
When the Style mode is selected, these are used to change
auto accompaniment sections and control the Auto Fill
function. (See page 45.) When the Song mode is selected,
this is used as a "fast forward" control, or move the song
playback point toward the end.
@4
[TEMPO/TAP] button
This button is used to call up the Tempo setting, letting you
set the Tempo with the numeric keypad or [+]/[-] buttons.
(See page 22.) It also allows you to tap out the tempo and
automatically start a selected song or style at that tapped
speed. (See page 40.)

I Rear Panel

#0
MIDI IN, OUT terminals
These are for connection to other MIDI instruments and
devices. (See page 84.)
#1
FOOTSWITCH jack
This is for connection to Footswitch for control over sus-
tain, just like the damper pedal on a piano. (See page 11.)
REW] button
] button
#0
Panel Controls and Terminals
@5
[SONG MEMORY] buttons
These buttons ([REC], [1] - [5], [A]) are used for song
recording, letting you record up to six different tracks of a
song (including a special Accompaniment track). (See
page 63.) They are also used for clearing recorded data of
all or specific tracks of a User song. (See pages 65, 66.)
@6
REGISTRATION MEMORY buttons
These are used for selecting and recording the Registration
Memory presets. (See page 55.)
@7
Disk Drive
This is for insertion of floppy disks, for loading and saving
of data. (See page 73.)
@8
Disk control buttons
These buttons are used for disk drive control.
@9
[PITCH BEND] wheel
This is used for raising or lowering the
pitch of the voices as you play.
The pitch bend range of the wheel can also
be set. (See page 31.)
#1 #2 #3
#2
PHONES/OUTPUT jack
This is for connection to a set of stereo headphones or to an
external amplifier/speaker system. (See page 11.)
#3
DC IN 12V jack
This is for connection to a PA-5D or PA-5C AC power
adaptor. (See page 10.)
9