Philips 5000 Series Guidance page 48

5 Place new shaving heads in the holder.
6 Place the retaining rings back onto the
1
shaving heads and turn them clockwise to
reattach the retaining ring.
2
-
Each retaining ring has two recesses
that fit exactly into the projections
of the shaving head holder. Turn the
ring clockwise until your hear a click to
indicate that the ring is fixed.
Note: Hold the shaving head holder in
your hand when you reinsert the shaving
heads and reattach the retaining rings. Do
not place the shaving head holder on a
surface, as this may cause damage to the
shaving heads.
7 Insert the hinge of the shaving head
holder into the slot in the top of the
shaving unit and close the shaving unit.
47
English