1 Make sure that the appliance is switched
off and disconnected from the wall
socket.
2 Press the release buttons on the shaving
unit and pull the shaving head holder off
the shaving unit.
3 Rinse the hair chamber and shaving head
holder under the tap.
4 Remove the shaving heads. For detailed
instructions, see 'How do I replace the
shaving heads?.'
Note: Do not clean more than one cutter
and guard at a time, since they are all
matching sets. If you accidentally put a
cutter in the wrong shaving guard, it may
take several weeks before optimal shaving
performance is restored.
5 Clean the cutter and guard under the tap.
6 Shake off excess water.
7 Put the shaving heads back into the
shaving unit. For detailed instructions, see
'How do I replace the shaving heads?.'
8 Insert the hinge of the shaving head
holder into the slot in the top of the
shaving unit and close the shaving unit.
41
English