Philips 5000 Series Guidance page 45

English
Using the Quick Clean Pod
6 Put the top of the Quick Clean Pod back
onto the base and turn it clockwise until
you hear a click.
Do not tilt the Quick Clean Pod to prevent
leakage.
Note: If you use the shaver with shaving
foam, shaving gel or pre-shave products,
thoroughly rinse the shaving heads before
you use the Quick
Clean Pod (see 'How do I clean my appliance
and the attachments?').
Always shake excess water off the shaver
before you place it in the Quick Clean Pod.
1 Place the shaver upside down into
the Quick Clean Pod. The shaver
automatically detects that it is in the
Quick Clean Pod.
2 Switch on the shaver to start the cleaning
program.
Each cleaning program takes
approximately one minute. During the
cleaning program the cleaning symbol
lights up continuously and the blue icon
pulses.The shaver handle vibrates twice
quickly when the cleaning program is
finished.
44