RODE Microphones VideoMic Quick Start Manual

RØDE SOUNDBOOTH
now for Broadcast mics
Hear and compare RØDE microphones
at www.rodemic.com/soundbooth or on your iPad
TM
The RØDE VideoMic features an integrated
shock mount based on Rycote
Constructed from a single piece of hard-wearing
®
thermoplastic, the Lyre provides superior acoustic
suspension to traditional elastic solutions,
and will never wear out, sag or snap.
Don't FORGET
to register for your
FREE ten year warranty!
Scan the QR code to
register now, or visit
warranty.rodemic.com/videomic
®
® ®
Lyre technology.
VideoMic
quickstart
guide
VideoMic
Parts Guide
1. Foam windshield
2. Camera shoe mount
3. Battery cover
4. PAD switch (inside battery compartment)
Mic Controls
LED power
indicator
The High Pass Filter (HPF ) is a low frequency cut-off setting, which you can use
to remove rumble, camera noise or other low frequency noise while recording.
www.rodemic.com
TM
TM
7
6
8
5. LED power indicator
6. Power and HPF switch
7. Integrated Rycote ® Lyre ® suspension
8. 3.5mm dual mono output cable
Mic ON
using High Pass Filter
Mic ON
Flat setting
Battery OFF
Mic mute