Before Connecting Cables - Samsung OH85N User Manual

Before connecting cables

OH85N
" The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
2
Silicone bar
3
Unfasten the screws, then remove the cover.
Remove the appropriate silicone bar for the thickness
of the cable to connect.
Different hole sizes and corresponding cable thickness
for each:
" 7 Ø hole x 1: Insert the 7 Ø cable
" 5.5 Ø hole x 6: Insert the 5.5 Ø cable
" 3 Ø hole x 2: Insert the 3 Ø cable
" 8.5 Ø hole x 1: Insert the 8.5 Ø cable
Insert the appropriate cable into the hole from which
the silicone bar was removed.
4
The cable should be connected as shown.
Close the cover, then fasten the screws.
" After all the cables are connected, make sure to
close the cover and fasten the screws to ensure it
is water tight.
" Recommended torque: 10 - 12 kgf.cm
8