Before Installing The Product (Installation Guide); Rotation; Ventilation - Samsung OH85N User Manual

Before Installing the Product (Installation
Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
with the installation instructions.
• Ensure that an authorized installation company installs the wall mount.
• Otherwise, it may fall and cause personal injury.
• Make sure to install the specified wall mount.

Rotation

" Supported model: OH85N
" Contact Samsung Customer Service Center for further details.
• To use the product in Portrait mode, rotate clockwise until the power indicator (A) is
positioned as shown in the images below.
A
" Do not use this model installed on a ceiling, floor, or table.
A

Ventilation

" Supported model: OH85N
" OH85N-DK and OH85N-DJ are double-sided display models. When installing the
product, allow space of at least 200 mm from the ceiling and floor, and keep the ambient
temperature below 50 °C.
" Contact Samsung Customer Service Center for further details.
" For outdoor products, add a partition between the inlet and outlet to keep air paths
separated.
Installation on a Perpendicular Wall
A Minimum 200 mm
B Ambient temperature: Under 50 °C
" When installing the product on a perpendicular wall, allow at
least 200 mm of space between the product and wall surface for
ventilation and ensure that the ambient temperature is kept below
50 °C.
Installation on an Indented Wall
A Minimum 200 mm
B Ambient temperature: Under 50 °C
" When installing the product on an indented
wall, allow at least the space specified above
between the product and wall for ventilation
and ensure that the ambient temperature is
kept below 50 °C.
A
B
7