Power cable connection guide
" The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
OH85N
1
Distribution
switchboard
2
Make sure that you have a 8.5 mm diameter
waterproof power cable that can withstand 1800 W or
higher.
" The power cable must be connected to a 20 A or higher
amperage circuit.
Connect the two power cables to each other. Solder
and insulate the connected part.
3
4
Put the soldered (connected) part of the power cables
inside the product.
Close the rear cover and fasten the screws.
11