Yamaha CS1X Owner's Manual page 41

In Utility mode you can set the CS1x system and MIDI parameters.
CS1x CS1x
SYSTEM SETTINGS
MIDI SETTINGS
MASTER TUNE
KBD TRANS
VEL CURVE
VEL FIX
Entering Utility Mode
Press the UTILITY button. A [ ] mark appears in the LCD
below the word "UTILITY".
Parameter Name
DEMO
PERFORMANCE MULTI
STORE UTILITY
NOTE
The LCD will display the parameter settings previously
selected in Utility mode. The first time you press the UTILITY button
after turning the power on, the LCD will display the first page (Master
Tune) in Utility mode.
Procedure
1. Select the parameter.
Press the Parameter Value UP/DOWN button corresponding to the
parameter you want to edit once to select the parameter and display
the settings in the LCD.
TIME
BANK
DEMO
PERFORMANCE MULTI
STORE UTILITY
MASTER
TUNE
2. Set the value.
Press the Parameter Value UP/DOWN button again to set the value.
Holding the Parameter Value UP/DOWN button changes the value
continuously. The [UP] button increases the value and the [DOWN]
button decreases the value.
TIME
BANK
DEMO
PERFORMANCE MULTI
STORE UTILITY
MASTER
TUNE
NOTE
You can also use the numeric keypad (0~9) or the Data
Entry knob to change the value.
MIDI
ASSIGN CONTROL
CHANGER NUMBER
TRANS CH
RCV CH
DEVICE NO
LOCAL
BULK DUMP
TIME LEVEL TIME LEVEL TIME
EFFECT
PROGRAM VOLUME PAN REV CHO
SEND SEND
SYSTEM
KBD VEL VEL TRANS RCV
TRANS CURVE FIX CH CH
TIME LEVEL TIME LEVEL TIME
EFFECT
PROGRAM VOLUME PAN REV CHO
SEND SEND
SYSTEM
KBD VEL VEL TRANS RCV
CURVE FIX CH CH
TRANS
NOTE
the other Parameter Value UP/DOWN buttons. Continue setting the
other parameters.
NOTE
Utility mode and return to each respective mode.
NOTE
mode. The CS1x will remember any changes you make in this mode.
Description of Each Function
SYSTEM
This sets the tuning and other keyboard settings for the CS1x
tone generator. There are four parameters: MASTER TUNE, KBD
TRANS (Keyboard Transpose), VEL CURVE (Velocity Curve) and
VEL FIX (Velocity Fix).
MASTER TUNE
This tunes the CS1x's tone generator. Basic pitch is 440 Hz at
note A3. Master tuning can be adjusted 1 Hz at a time.
Settings:
-102 Hz to 0 (A3=440 Hz) to +102 Hz
LEVEL
KBD TRANS (Keyboard Transpose)
VARI
SEND
This lets you transpose the pitch in semitones. The transpose
value will also be reflected in the Octave Shift function on the
panel.
MIDI
DEVICE
NO
Settings:
LEVEL
VARI
-36 to 0 (standard) to +36
SEND
NOTE
panel, the indication may be changed after using the OCTAVE SHIFT
MIDI
function.
DEVICE
NO
40
Other parameters will appear in the LCD when you press
Press the PERFORMANCE button or the MULTI button to exit
It is not necessary to store changes made in the Utility
This function setting is related to OCTAVE SHIFT on the