Carbon Filter; Plasma Filter; Lighting - Atag CU1050SMR Instructions For Use Manual

MAINTENANCE
Carbon filter [optional]
PUSH
PUSH
Plasma filter [optional]

Lighting

For recirculation purpose you can choose for washable carbon odour
filters or for plasma odour filtering. The Carbon odourfilters can be
regenerated.
1. Remove the filter matrass from the filterframe and clean the matrass
in the dishwasher, without detergent.
2. Dry the filtermatrass in the oven for 1 hour at a max. temperature of
80 degrees.
3. Place the filters back afterwards.
B
B
PUSH
PUSH
A
A
A
Instead of using washable carbon odour filters, this built in unit can be
operated with a plasma filter as well. See installation steps on how to
install this. Make sure there are no carbon odourfilters installed when
using a plasma filter.
• The built in unit is fitted with LED lighting.
• LED lamps guarantee you optimum lighting, a service life of up to
10 times longer than conventional lamps and energy savings of as
much as 90%.
• Contact the technical department when LED lighting needs to
be replaced.
A
PUSH
PUSH
B
B A
B
B
B
B
A
A
A
EN 11