Combining Two Voices (Dual Mode) - Yamaha Clavinova CLP-230 Owner's Manual

Combining Two Voices (Dual mode)

You can play two voices simultaneously across the entire range of the keyboard. In this way, you
can simulate a melody duet or combine two similar voices to create a thicker sound.
REC
ON
MIN MAX
MASTER VOLUME DEMO TRANSPOSE
Procedure
1.
Engage Dual mode.
Press two voice buttons at the same time (or press one voice button while hold-
ing another). The voice indicators of both selected voices will light when Dual
mode is active.
• According to the voice numbering
priority shown in the diagram on
the right, the lower value voice
number will be designated as Voice
1 (the other voice will be desig-
nated as Voice 2).
The CLP-240/230 Function mode provides access to a number of other Dual
mode functions, such as volume balance setting or octave setting (page 49). (If
you do not set Dual mode functions, the appropriate setting will be set in each
voice by default.)
2.
Exit Dual mode and return to normal play mode.
To return to the normal single-voice play mode, press any single voice button.
TEMPO / OTHER VALUE
LEFT RIGHT ON/OFF
USB SAVE/EXP.
USER LOAD TEMPO METRONOME
STOP PLAY/PAUSE
PRESET FORMAT/DEL. FUNCTION #
SYNC START
#
SONG SONG SELECT FILE TEMPO / FUNCTION
Voice numbering priority
1 2
GRAND GRAND
PIANO 1 PIANO 2
CHURCH JAZZ
ORGAN ORGAN
8 9
1 2
GRAND GRAND E.PIANO E.PIANO HARPSI-
PIANO 1 PIANO 2 1 2 CHORD
CHURCH JAZZ
+
– / NO / YES ORGAN ORGAN STRINGS CHOIR GUITAR
VOICE
3 4 5 6 7
E.PIANO E.PIANO HARPSI- E.CLAVI- VIBRA-
1 2 CHORD CHORD PHONE
WOOD
STRINGS CHOIR GUITAR BASS E.BASS
VOICE
10 11 12 13 14
Selecting & Playing Voices
E.CLAVI- VIBRA-
CHORD PHONE VARIATION
ROOM CHORUS
BRIGHT HALL 1 PHASER HARD
NORMAL HALL 2 TREMOLO MEDIUM
WOOD
BASS E.BASS SPLIT MELLOW STAGE ROT ARY SP SOFT ON
BRILLIANCE REVERB EFFECT TOUCH DDE
CLP -240
NOTE (CLP-240)
Dual and Split (page 26) modes
cannot be engaged at the same
time.
NOTE
[VARIATION] in Dual Mode
(CLP-240)
The [VARIATION] button's indica-
tor will light if the variation is
engaged for either or both of the
Dual mode voices. While Dual
mode is engaged, the [VARIA-
TION] button can be used to turn
the variation for both voices on or
off. To turn the variation on or off
for only one of the voices, hold
the voice button for the other
voice and press the button of the
voice for which you want to
change the variation.
NOTE
[REVERB] in Dual Mode
The reverb type assigned to
Voice 1 will take priority over the
other. (If the reverb is set to OFF,
Voice 2 reverb type will be in
effect.)
NOTE
[EFFECT] in Dual Mode
Depending on the conditions, one
effect type may take priority over
the other. Depth will be decided
according to the depth default
value of the voice combination.
However, using function F3
(page 49) you can adjust the
depth value for each voice to your
liking.
CLP-240/230 Owner's Manual
25