Combining Two Voices (Dual Mode) - Yamaha Clavinova CLP-F01 Owner's Manual

Combining Two Voices (Dual mode)

You can play two voices simultaneously across the entire range of the keyboard. In this way, you
can simulate a melody duet or combine two similar voices to create a thicker sound.
MIN MAX
MASTER VOLUME
MELLOW BRIGHT
BRILLIANCE DEMO
Procedure
1
Engage Dual mode.
Press two voice buttons at the same time (or press one voice button while hold-
ing another). The voice indicators of both selected voices will light when Dual
mode is active.
• According to the voice numbering
priority shown in the diagram on
the right, the lower value voice
number will be designated as Voice
1 (the other voice will be desig-
nated as Voice 2).
The CLP-F01 Function mode provides access to a number of other Dual mode
functions, such as volume balance setting or octave setting (page 44). (If you do
not set Dual mode functions, the appropriate setting will be set in each voice by
default.)
2
Exit Dual mode and return to normal play mode.
To return to the normal single-voice play mode, press any single voice button.
28 Selecting & Playing Voices
CLP-F01
TEMPO/OTHER VALUE
TEMPO
FUNCTION
-
START/STOP NO
METRONOME
TEMPO/FUNCTION
GRAND
PIANO 1
USER 1
USER 2
CHURCH
USER 3
+
YES PRESET TRACK TRACK START/STOP REC ORGAN
1 2
SONG
Voice numbering priority
1 2 3 4 5
GRAND GRAND GRAND E.PIANO E.PIANO HARPSI-
PIANO 1 PIANO 2 PIANO 3 1 2 CHORD
CHURCH JAZZ GUITAR/ WOOD
ORGAN ORGAN STRINGS CHOIR CLAVI. BASS
VOICE
8 9 10 11 12 13
1 2
GRAND GRAND E.PIANO E.PIANO HARPSI- VIBRA-
PIANO 2 PIANO 3 1 2 CHORD PHONE VARIATION
ROOM
HALL 1
HALL 2
JAZZ GUITAR/ WOOD
STAGE
ORGAN STRINGS CHOIR CLAVI. BASS E.BASS SPLIT
REVERB EFFECT
VOICE
NOTE
Dual and Split (page 29) modes
cannot be engaged at the same
time.
TIP
[VARIATION] in Dual Mode
The [VARIATION] button's indi-
cator will light if the variation is
6 7 engaged for either or both of the
Dual mode voices. While Dual
mode is engaged, the [VARIA-
VIBRA-
PHONE
TION] button can be used to
turn the variation for both voices
E.BASS
on or off.
To turn the variation on or off for
only one of the voices, hold the
voice button for the other voice
14
and press the button of the voice
for which you want to change
the variation.
TIP
[REVERB] in Dual Mode
The reverb type assigned to
Voice 1 will take priority over the
other. (If the reverb is set to OFF,
Voice 2 reverb type will be in
effect.) Reverb depth setting via
the panel controls (i.e., pressing
the [–/NO] or [+/YES] buttons
while holding the [REVERB] but-
ton — see page 24) will be
applied only to Voice 1.
TIP
[EFFECT] in Dual Mode
Depending on the conditions,
one effect type may take priority
over the other. Depth will be
decided according to the depth
default value of the voice combi-
nation. However, using function
F3 (page 44) you can adjust the
depth value for each voice to
your liking.
Effect depth setting via the panel
controls (i.e., pressing the [–/
NO] or [+/YES] buttons while
holding the [EFFECT] button —
see page 25) will be applied only
to Voice 1.
CHORUS
PHASER HARD
TREMOLO MEDIUM
DELAY SOFT
ON
TOUCH TRANSPOSE