Turning The Power On - Yamaha Clavinova CLP-220 Owner's Manual

Turning the Power On

1. Connect the power cord.
Insert the plugs at the ends of the cord: one into the AC INLET on the Clavinova, and the other into a standard AC
outlet.
In some areas, a plug adaptor may be provided to match the pin configuration of AC wall outlets in your area.
1
CAUTION
Make sure your CLP-220 is rated for the AC voltage supplied in the area in which the piano will be used. (The voltage rating appears on
the name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom panel of the main keyboard unit
near the power cord. Make sure that the voltage selector is set for the voltage in your area. Connecting the unit to an inappropriate AC
supply can seriously damage the internal circuitry and may even pose a shock hazard!
Use only the AC power cord supplied with the CLP-220. If the supplied power cord is lost or damaged and needs to be replaced, contact
your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard!
The type of AC power cord provided with the CLP-220 may be different depending on the country in which it was purchased. (In some
areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.)
Do NOT modify the plug provided with the CLP-220. If the plug will not fit the outlet, have a proper outlet installed by a qualified electri-
cian.
2. Turn the power on.
Press the button.
[POWER]
• The power indicator located below the left end of the keyboard lights up.
To turn the power off, press the
• The power indicator turns off.
Power indicator
If you forget to turn off the power to the piano and close the key cover, the power indicator will remain lit, indicating that the power is still
on.
(bottom surface)
Power indicator
button again.
[POWER]
2
(The shape of the plug differs depending on locale.)
[POWER]
CLP-220
Before Using the Clavinova 11