Yamaha Clavinova CLP-820 Owner's Manual page 64

4
64
CLP-880/860/840/820/820S
B
6 x 16 mm flat-head screws
V
Attach the center panel (B) to the side pan-
els (D).
The center panel (B) is installed between the side panels (D)
with the brackets on each end toward the rear of the stand assem-
bly. Place the square holes in the center-panel brackets over the
lugs extending from the side panels, then slide down. Each side
of the center panel is attached using two 6 x 16 flat-head screws
3.
D
3