This chapter explains how to use the Quick Loop Sampler section.
The AW1600 contains a quick loop sampler that lets you play stereo waveforms (samples) by
striking the four pads.
Each pad 1–4 has four sample banks (A–D) to which you
can assign samples. By switching the sample bank for
each pad, you can use up to sixteen different samples.
Pad 1
Pad 2
A
A
B
B
C
C
D
D
Sample banks
When you strike a pad 1–4, the assigned sample will be
sent via pad channel 1–4 to the stereo bus. For each pad
channel, you can adjust the EQ, dynamics, and effects 1/2
send levels just as you can for the track channels or input
channels.
Chapter 11
Quick loop sampler
About the quick loop sampler
Pad 3
Pad 4
A
A
B
B
C
C
D
D
● Signal flow when using the Quick Loop
Sampler
1
2
3
4
Pads
Pad
channels
Stereo bus
You can load samples into the pads from the sample
library (a library for the Quick Loop Sampler), load a por-
tion of an audio track or audio CD, or load a WAV file.
AW1600 Owner's Manual
11
Stereo
output
channel
Mixer section
111