About the CD-ROM included with the AW1600
● Setting Pro Tools remote control
You can remotely control the Pro Tools software from the
AW1600. No special setting file is required. Use the fol-
lowing procedure to make settings.
1
In the menu bar, select [Setup] ➝
[Peripherals...].
2
The Peripherals window will open. Click the
[MIDI Controllers] button.
In the MIDI Controllers window, make the following
settings. In the Receive From field and the Send To
field, specify the MIDI device you are using.
Type
Receive From
Your MIDI input
#1
CS-10
device
This completes preparations for using the AW1600's
MIDI Remote function to control the Pro Tools software.
214
AW1600 Owner's Manual
Send To
#ch's
Your MIDI output
16
device