Recording A User Style - Yamaha Artiste AR-100 Owner's Manual

Recording a User Style

1.
Set up the AR-100 for recording by turning off all Voice sections in the
ENSEMBLE section.
Turning off all Voice sections allows you to properly hear the parts you will be recording. Also
make sure that Keyboard Percussion has been turned off (both LOWER and PEDAL).
LOWER LOWER LOWER
VOICE VOICE ORGAN
1 2
LOWER
2.
Make overall settings for the new Style (Section, Beat, Measure) from the
BASIC page.
Before you start recording a new Style, some important overall settings should be made from the
Basic page. First, select the section you'll be recording, then set the time signature (Beat) and
length (Measure) of the Style to be recorded.
To do this:
Select the BASIC page with the appropriate Menu button and change the
settings with the corresponding Data Control buttons.
1 2 3
ENSEMBLE
UPPER UPPER UPPER LEAD
VOICE VOICE ORGAN VOICE
1 2
UPPER LEAD
Section, Beat, and Measure
settings are shown in middle of
display (in all Accompaniment
Program pages) for easy
4 5
reference.
9.
Accompaniment Program
PEDAL PEDAL PEDAL
VOICE VOICE ORGAN
1 2
PEDAL
PAGE
129