Download  Print this page

Deep Edit - Yamaha Magicstomp Bass Effects Processor Owner's Manual

Yamaha bass effects processor owner's manual.
Hide thumbs

Advertisement

OK, now try and edit a patch to your liking.
* For more information on parameters of individual effects, refer to the separate "Effect List" sheet.
* Parameters for the patch(effect) can only be adjusted when the MAGICSTOMP is in its normal operating mode
(when a patch is selected and the effect is switched "ON"). Parameters can not be adjusted if the effect is switched
"OFF" or when the MAGICSTOMP is in the Store Mode (→page 18), Name Edit Mode (→page 20) or Tuner
Mode (→page 24).
After creating something you like, use the store operation (→ page 18) to save your settings in the
MAGICSTOMP. Please be aware that if another patch is selected before carrying out the store op-
eration, or the power is disconnected, all changes you made will be lost and the data will return to its
original condition.
If you have already seen the "Effect List", you will have noticed a long list of parameters in each
patch's effect list that do not appear on the MAGICSTOMP's display. Each patch contains a variety of
parameters besides those that appear on the display.
With "Deep Edit", which is described in the next section, you can get in and edit all of these param-
eters as well as assign parameters to the MAGICSTOMP's control knobs. Give the Deep Edit mode
a try. Using it to make precision edits you can create a wide range of sounds.
I Deep Edit
Any of the parameters in the currently selected patch can be edited. You can use this, along with the
ability to select a different effect type, to create original patches.
q
Press the [STORE/EXIT] button.
"PRESS[STORE]1sec" will appear on the lower half of the display.
* If you press the [STORE/EXIT] button when a Preset Patch is selected, the corresponding User Patch num-
ber will automatically be selected as the destination patch number for storing.
w
Press the ON/OFF switch once and release quickly (within one second).
You are now in the Deep Edit Mode and the display should appear as shown below.
* If you press the ON/OFF switch for more than 1 second, you will enter the Name Edit Mode (→ page 20)
Deep Edit Icon
Create your own sound
or
Deep Edit Icon
15

Advertisement

Table of Contents

   Related Manuals for Yamaha Magicstomp Bass Effects Processor

This manual is also suitable for:

Magicstomp

Comments to this Manuals

Symbols: 0
Latest comments: