Yamaha Magicstomp Bass Effects Processor Owner's Manual page 19

G Saving the data to a different patch number
q
After you're done editing, press the [STORE/EXIT] button.
w
Select the patch number to which you want to save the data.
Use the – or + switches to select the destination patch number to which you want to save your
data.
e
You can also give the patch a new name.
To change the name of the patch, follow steps
r
Press and hold the [STORE/EXIT] button (about 1 second) until "NOW STOR-
ING..." appears on the display.
* To cancel the store operation, press and quickly release the [STORE/EXIT] button (within 1 second) and the
MAGICSTOMP returns to its original condition (the changed patch name returns to its original name).
Other than the patch name, any changes made to parameter data will be safe until another patch is selected.
In additions to creating and storing new patches, you can use the store operation to put
patches in the same order that you use them in performance making selection while
playing quick and convenient.
Destination patch
number for storing
Destination patch The name of the edited
number for storing
patch
w
through
Press and hold
Saving Patches
The name of the
edited patch
r
described on page 20.
Store complete!
19