Table of Contents
Advertisement
The other way to select patches is with the [Performance Mode].
In this mode, the –, +, and ON/OFF switches are used to select one of three adjacent patches.
q
To enter the Performance Mode, press and hold any two switches (from –, +, and
ON/OFF).
"PERFORMANCE MODE" appears in the display to inform you that the MAGICSTOMP is now
in the Performance Mode.
w
Press and hold the – or + switch to change the patch set.
– switch: U01/02/03→P97/98/99→P94/95/96→...
+ switch: U01/02/03→U04/05/06→U07/08/09→...
* Patch sets (three adjacent patches make a patch set) have been predetermined. (U01, U02, U03), (U04, U05,
U06) ...... (U97, U98, U99), (P01, P02, P03) ...... (P97, P98, P99).
* When the MAGICSTOMP switches to the Performance Mode, the patch set containing the patch number
selected with the Up/Down Mode is selected.
e
To return to the UP/DOWN Mode, press and hold any two switches (from –, +,
and ON/OFF).
"UP/DOWN MODE" appears in the display to inform you that the MAGICSTOMP is now in the
Up/Down Mode.
Example) Switching from the Up/Down Mode (patch U06 is selected) to the Performance Mode.
Up/Down Mode
Press and hold any two of the three
switches
Performance Mode
Using the MAGICSTOMP
When in the Performance Mode, the lamp of the currently
selected patch lights (U05 is selected in the illustration below).
Patch U04
ON/OFF switch
Patch U05
Press and hold
ON/OFF switch
the – switch.
U01/02/03
P97/98/99
P94/95/96
P91/92/93
:
:
When all three patches are switched OFF, the
display appears as follows (all lamps are off).
Patch U06
ON/OFF switch
Press and hold
the + switch.
U07/08/09
U10/11/12
U13/14/15
U16/17/18
:
:
13
Advertisement
Table of Contents
