Helmet Holder; Adjusting The Shock Absorber Assembly - Yamaha XVS13AW(C) Owner's Manual

Helmet holder

1. Helmet holder
The helmet holder is located under the
rider seat.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
3-11.)
2. Attach the helmet to the helmet
holder, and then securely install
the seat.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
INSTRUMENT AND CONTROL FUNCTIONS
EAU14320 To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.
EWA10160
Adjusting the shock absorber
assembly
1. Shock absorber assembly
2. Position indicator
3. Spring preload adjusting ring
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring, allowing the spring preload to
be adjusted to suit the rider's prefer-
ence.
It is recommended to have a Yamaha
dealer adjust the spring preload.
CAUTION:
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
3-12
EAU42540
3
ECA10100