Replacing The License Plate Light Bulb - Yamaha XVS13AW(C) Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the license plate
light bulb
1. Remove the license plate light cov-
er by removing the bolts.
1. License plate light cover
6
2. Bolt
2. Pull the license plate light unit up
as shown.
1. License plate light unit
EAU42481 3. Remove the license plate light
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
1. License plate light bulb socket
4. Remove the defective bulb by pull-
ing it out from the socket.
1. License plate light bulb
5. Insert a new bulb into the socket.
6-35
6. Install the socket (together with the
bulb) by pushing it in, and then turn
it clockwise until it stops.
7. Place the license plate light unit in
the original position, and then in-
stall the license plate light cover by
installing the bolts.