Assembly; General Information - MANN+HUMMEL ProVent Series Installation And Maintenance Manual

MANN + HUMMEL ProVent
Pos. Name
1 Lid with integrated pressure control valve
2 Oil separating element
3 Housing
4 Pressure relief valve/bypass valve
5 Holder
6 Oil return
7 Inlet

4 Assembly

4.1 General information

Check that the scope of delivery is complete
and that there are no signs of damage.
If parts delivered are damaged, please inform
MANN+HUMMEL immediately.
The assembly of the ProVent and the
installation of the lines may only be
carried out by qualified persons
instructed for this purpose.
It is essential
information on correct assembly when
completing assembly and installation
work.
Pay attention to the direction of flow.
Carry out fixations conscientiously.
MANN+HUMMEL Industrial Filters
to observe the
Pos. Name
8 Outlet
9 Seal of blow-by inlet
10 Seal of lid/housing
11 Pressure control valve
12 Seals of element
13 Quick-connect couplings
14 Lid with integrated pressure relief valve
When working on the fuel supply,
always place collecting vessels under
the tank or lines to collect any
escaping fuel. Dispose of collected
fuel or oil in accordance with the
respective applicable local waste
disposal directives.
Health hazard due to escaping oil!
Wear safety goggles and gloves.
(Also refer to the material safety data
sheet for diesel fuel)
6