MANN+HUMMEL ProVent Series Installation And Maintenance Manual page 14

MANN + HUMMEL ProVent
•
Manually remove the old oil separator
element, if necessary with a suitable aid, and
dispose of it properly.
•
Mount the new replacement element in the
ProVent. Ensure correct seating.
•
Screw on the lit in the previous position
again. Tightening torque: 4 Nm.
•
Reconnect the drain hose if necessary.
ProVent 150
•
Detach the hose on the outlet fitting (1) if
necessary.
•
Turn the lid up to the fold recess ("Service"
position, Fig. 12) and remove the lid upward
with the element (see Fig. 12).
MANN+HUMMEL Industrial Filters
Fig. 11 Changing oil separator of ProVent 100
Fig. 12 Detaching lid of ProVent 150
1
14