Advertisement
Quick Links
Advertisement
Related Manuals for MANN+HUMMEL TRIDIM Tri-Lock GS
Summary of Contents for MANN+HUMMEL TRIDIM Tri-Lock GS
- Page 1 Tri-Lock™ GS & FS Operation & Maintenance Manual...
-
Page 2: Table Of Contents
Tri-Lock Operation & Maintenance CONTENTS Introduction Application Performance Handling and Storage of Filter Elements Installation of New Housings Start-Up Procedures Appendix A Appendix B TRI-DIM TRI-LOCK OPERATION AND MAINTENANCE... -
Page 3: Introduction
Tri-Lock Introduction INTRODUCTION APPLICATION The Tri-Lock FS/GS HEPA side-access air filter Tri-Dim®’s Tri-Lock FS/GS HEPA Side Access air unit is a permanent housing designed to hold filter housing is designed for a range of either gasket or fluid seal filters. It is an applications, including: intermittently welded and caulked product—with a seal-welded construction optional—designed... -
Page 4: Performance
Tri-Lock Performance – Fluid Seal INSTALLABLE FILTERS DESCRIPTION OF FLUID-SEAL FILTER LOCKING SYSTEM Tri-Lock FS and GS accommodate different Tri-Pure™ HEPA and Housing Locking Arm Tri-Dim ASHRAE filters. Standard versions of the housings accommodate 24” x 24” x 11½”-deep HEPA filters with DOP HEPA Filter efficiencies of 95%, 99.97% or 99.99% @ 0.3 μm. - Page 5 Tri-Lock Performance – Gasket Seal GASKET SEAL DESIGN CONCEPT The applied force has a minimum-clamping load of 1,400 pounds per perimeter of the filter. The gasket on the filter is compressed to The filter-to-housing gasket seal is effected by means of a 1/8”...
-
Page 6: Handling And Storage Of Filter Elements
Handling, Storage And Installation HANDLING AND STORAGE OF FILTER INSTALLATION OF NEW HOUSINGS ELEMENTS Position the housing adjacent to the ductwork. Housing should be welded, bolted or gasketed Particulate filters include a wide range of filter permanently to the ductwork. types, sizes and performance capabilities. -
Page 7: Start-Up Procedures
Start-Up Procedures Getting Started BEFORE YOU START START-UP PROCEDURE The system must be shutdown prior to any filter installation or Clean outside the door, work area and all metal surfaces. removal. Air flow should be stopped or a bypass of the air system Provide filter: Provide a new HEPA filter(s) and or prefilter for must be made. - Page 8 – all descriptions, specifications and performance data are subject to change without notice. Tri-Dim products are manufactured to exacting criteria – there can be a ±5% variance in filter performance. Tel: 800-458-9835 tridim.com info@tridim.com mann-hummel.com 2500-15 0920 © MANN+HUMMEL GmbH...