MANN+HUMMEL ProVent Series Installation And Maintenance Manual page 18

MANN + HUMMEL ProVent
•
If necessary, position a suitable aid at the
locking points at the edge of the lid and
carefully lift the lid. This loosens the lid.
•
Remove the lid with the oil separator element.
•
Pull the oil separator element off the lid fitting
(see Fig. 24)
Dispose of the old oil separator element
properly.
•
Mount the new replacement element on the
lid fitting.
MANN+HUMMEL Industrial Filters
Fig. 22 Removing lid of ProVent 800
Fig. 23
Removing oil separator of ProVent 800
Fig. 24 Fitting oil separator of ProVent 800
18