Lan/Ethernet Cable Connection - ABB Ability Smart Sensor Gateway Installation Manual

2.5

LAN/Ethernet cable connection

If a LAN/Ethernet network is available, the gateway can be configured to use it. Additional
PoE injector is needed for power supply.
From the Gateway Basic Page select:
-
Connection Priority: Wired
-
IP Allocation: DHCP or Static (in case the IP allocation is given)
Press Apply at the bottom of the screen.
DOCUMENT ID
9AKK107046A4620
© Copyright 2020 ABB. All rights reserved.
Figure 6 LAN network configuration
REV.
G
AB B ABI L IT Y ™ S M A RT S EN SO R G AT EWAY
DATE
April 2020
LANG. PAGE
EN 10/17