Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Problem
Problem
During the hot air operation, cool air is
usually mixed, and even sparks appear.
(The spark is caused by the action of
thermoswitch as a protective device. It
is not a fault.)
The plug is abnormally overheating.
During operation, the unit outputs air
intermittently.
The cord is abnormally overheating.
Sparks occur inside the nanoe™ outlet.
A humming noise is heard from the
nanoe™ outlet.
22
Possible cause
Possible cause
· When dust blocks the air inlet and
air outlet, the thermoswitch will be
started, and the cool air is usually
blown at the moment of start-up.
· The air inlet is blocked by hair or
hand, etc.
The household outlet connected to the
product may be loose.
The cord is damaged.
The electrodes have become dirty
resulting in an abnormality.
Action
Action
· Clear away the
accumulated dust
(See P.20 for
instructions).
· Do not block the air
inlet.
Please use a well-
conditioned household
outlet.
Immediately stop using
the unit.
Clean the inside of the
nanoe™ outlet (see
P.21 for instructions).
Advertisement
Chapters
Table of Contents
