Table of Contents
Advertisement
2
Set whether to have nanoe™ with the nanoe™
Set whether to have nanoe™ with the nanoe™
switch.
switch.
· nanoe™ is invisible to the naked
eye.
· Drops of water may blow out of the
nanoe™ outlet during use, but this
is not a malfunction.
· If you want your hair to have more
volume, set the nanoe™ switch to
"
Off".
3
Select the air temperature.
Select the air temperature.
: Hot air
: Healthy air
: Cool air
· If you want to dry your hair with cool air, set the
temperature selection switch to position " Cool air".
· If you want to dry your hair quickly, set the
temperature selection switch to position " Healthy
air" or "
Hot air".
4
Select the wind power.
Select the wind power.
2: Dry (Strong airfl ow)
1: Set (Gentle airfl ow)
0: Off
· nanoe™ will be generated while the main switch
is in the "1 Set (Gentle airfl ow)" or "2 Dry (Strong
airfl ow)" position and the nanoe™ switch is set to
"
On".
5
Dry your hair with the hair
Dry your hair with the hair
dryer.
dryer.
· Blowing your hair at the roots
will dry it faster.
· If you are concerned that
your hair may be damaged,
please set the switch to
position " Healthy air" or
" Cool air".
· Keep a distance of over 3 cm between the air outlet
and your hair.
· Keep a distance of over 10 cm between the air inlet
and your hair.
· By gripping the nanoe™ charge panel, more
nanoe™ can penetrate the hair with moisture and
improve the nanoe™ effect.
6
Set the main switch to position "0", and then unplug
Set the main switch to position "0", and then unplug
the unit from the household outlet.
the unit from the household outlet.
· After the unit has completely cooled, store it at a dry
place.
3 cm
10 cm
19
Advertisement
Chapters
Table of Contents
