Ricoh Ri 1000 Operator Training page 96

• What Pretreatment does.
Preteatment is a primer/bonding agent that is
when using white ink.
(MSDS Ingredients list available).
• Required tools
A sprayer that can spray a fine mist, A Wagner HVLP (High Volume
Low Pressure) sprayer is recommended, you can also use another
type of HVLP Sprayer.
• Application Procedure
Mix the pretreatment with distilled water at a 2 to 1 ratio and
apply an even coat
not soaked. Be sure to squeegee in one direction to get even
coverage and to flatten the fibers of the garment.
• Drying options
Line dry, Flash Dry, Conveyer dry, or heat press by hovering the
heating element above the garment.
• Storage
Once completely dry, shirts can be folded and stored until needed.
to the point where the garment looks wet but
AnaJet Ricoh _ Ri 1000- Operator Training
Pretreatment
only necessary
96