Ricoh Ri 1000 Operator Training page 107

White Ink Underbase Settings
White Base Ink Control
•Quality- should be set to the default value of
Fine
•Dot Range should be set to Extra Wide
• Color Contrast will adjust how much white ink
is printed for lighter and darker colors. 100 %
will give you the most white. The more the
slider is moved to the left the less white is
used.
• Opacity Contrast will help give you a softer
blend into the garment if your images has a
transparent or fading edge like in the image
shown. Move the Slider right to soften and to
the left for a harder edge.
• Choke should be set to the default value of 1,
if you notice any white ink outside the edge of
the print the value will need to be increased.
What choke does is compensate for the
swelling of white ink when printed.