CleaningTheShaver - Panasonic ES‑ST37 Manual

►Notes
• Before shaving, check that the cleaning shutter is closed.
• Place your finger on the finger rest while in use.
Keeping your finger placed on the power switch during
use may switch the mode or turn the shaver OFF.
• Do not use shaving creams or face cleansers
containing scrubbing compounds as these may cause
the outer foil to clog.
• We recommend using the shaver in an ambient
temperature range of 5 – 35 °C. If used outside this
range, the appliance may stop operating.
Reading lamps when using
When the battery capacity is low
The charge status lamp ( ) blinks once
every second when operating the
shaver.
• You can shave 2 to 3 times after the charge status
lamp ( ) blinks. (This will differ depending on usage.)
• A full charge will supply enough power for approx. 14
shaves of 3 minutes each.
• If the shaver is operated in the shaving sensor mode
in a battery‑shortage condition, the shaving sensor
lamp ( ) glows blue, and the charge status lamp ( )
blinks red.
32
ES-ST37_CH.indb 32
Cleaning the shaver
1. Remove the shaver from the charging
stand.
2. Apply some hand soap and some
water to the outer foil.
• Close the cleaning shutter.
3. Turn the shaver on.
▼
There are two ways to clean the shaver, depending
on the actual dirt level.
▼
2
▼
2014/11/20 9:40:11