Table of Contents
Advertisement
WCS-PG410
Product Description
Front Panel
WCS-PG410 Modul
Figure 2.3
WCS read head: LED status indicator and rotary coding switch
Power/State:
The "Power/State" LED lights up green: voltage supply is present.
State:
The "State" LED is green: Data is being exchanged with the WCS read heads. The four
"ErrorNo/Select ID" LEDs are used to display the number of the currently polled read head.
Error No/Select ID
8
0
0
0
1
Table 2.1
The "State" LED lights up red: The interface module has detected an error or a warning. The
interface module uses the "ErrorNo/Select ID" LEDs to display the binary coded error number
or warning number, and sends the number to the PROFIBUS master via the external diagnostic
byte.
Error (No. 1...5):
Warning (No. 6...15):
8
Front panel overview
4
0
0
1
0
Display via the four "ErrorNo/Select ID" LEDs when the "State" LED lights up green
Switch the interface module off and back on. If the error occurs
again, the module must be replaced.
The warning provides information. The interface module displays
the warning for one minute and then resets automatically.
PROFIBUS
Termination
2
1
0
1
1
0
0
0
0
0
Read head
address
0
1
2
3
Advertisement
Table of Contents
