Table of Contents
Advertisement
WCS-PG410
Installation
3.3
Dismounting
Dismounting the modules
Use a suitable slot-head screwdriver for dismounting the module.
1.
Disconnect all the supply and signal lines.
4
3
Figure 3.4
2.
Insert the screwdriver (2) into the groove of the mounting bracket (3).
3.
Press the screwdriver (2) in the specified direction until the lock on the DIN mounting rail (4)
opens, see figure.
4.
Then press the module (1) upwards and lift it out of the DIN mounting rail.
14
1
2
Dismounting
Advertisement
Table of Contents
