Pepperl+Fuchs BTC22 Series Manual
  1. Manuals
  2. Brands
  3. Pepperl+Fuchs Manuals
  4. Computer Hardware
  5. BTC22 Series
  6. Manual
Pepperl+Fuchs BTC22 Series Manual

Pepperl+Fuchs BTC22 Series Manual

Box thin client
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BTC22-*
Box Thin Client for
Industrial Applications
Manual

Advertisement

Table of Contents
loading

Related Manuals for Pepperl+Fuchs BTC22 Series

Summary of Contents for Pepperl+Fuchs BTC22 Series

  • Page 1 BTC22-* Box Thin Client for Industrial Applications Manual...
  • Page 2 Phone: +49 621 776 - 0 E-mail: info@de.pepperl-fuchs.com North American Headquarters Pepperl+Fuchs Inc. 1600 Enterprise Parkway Twinsburg, Ohio 44087 Phone: +1 330 425-3555 E-mail: sales@us.pepperl-fuchs.com Asia Headquarters Pepperl+Fuchs Pte. Ltd. P+F Building 18 Ayer Rajah Crescent Singapore 139942 Phone: +65 6779-9091 E-mail: sales@sg.pepperl-fuchs.com https://www.pepperl-fuchs.com...

  • Page 3: Table Of Contents

    BTC22-* Contents History of the Manual ....................4 Safety .......................... 5 Introduction ....................5 2.1.1 Content of this Document ....................5 2.1.2 Content of this Document ....................5 2.1.3 Content of this Document ....................6 2.1.4 Manufacturer ........................7 2.1.5 Target Group, Personnel .....................

  • Page 4: History Of The Manual

    BTC22-* History of the Manual History of the Manual The following editions of the manual have been released: Version Comments 11/2023 First edition...

  • Page 5: Safety

    BTC22-* Safety Safety Introduction 2.1.1 Content of this Document This document contains information that you need in order to use your product throughout the applicable stages of the product life cycle. These can include the following: • Product identification • Delivery, transport, and storage •...

  • Page 6: Content Of This Document

    BTC22-* Safety • Dismounting • Disposal Note For full information on the product, refer to the further documentation on the Internet at www.pepperl-fuchs.com. Note For specific device information such as the year of construction, scan the QR code on the device. As an alternative, enter the serial number in the serial number search at www.pepperl-fuchs.com.

  • Page 7: Manufacturer

    Control drawings • Functional safety manual • Additional documents 2.1.4 Manufacturer Pepperl+Fuchs Group Lilienthalstraße 200, 68307 Mannheim, Germany Internet: www.pepperl-fuchs.com 2.1.5 Target Group, Personnel Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount- ing lies with the plant operator. Only appropriately trained and qualified personnel may carry out mounting, installation, com- missioning, operation, maintenance, and dismounting of the product.
  • Page 8 BTC22-* Safety Informative Symbols Note This symbol brings important information to your attention. Action This symbol indicates a paragraph with instructions. You are prompted to perform an action or a sequence of actions.

  • Page 9: Product Description

    BTC22-* Product Description Product Description Application The BTC22 is a rugged, industrial strength box thin client optimized for 24/7 operation. The BTC22 has been specially designed for immunity to shock, vibration, and temperatures within an optional extended range of -20°C to +60°C (standard temperature grade) and is character- ized by a fanless construction and industrial strength components.
  • Page 10 BTC22-* Product Description Dual Monitor Setup Figure 3.1 Two monitors with Ultra HD resolution (4K at 60 Hz) The BTC22 is optimized for modern, Ultra HD-compatible monitors. In a standard scenario, up to two Ultra HD-capable monitors can be connected to the native DisplayPorts™. Additionally an third Ultra HD Monitor can be connected via the USB Type C port.

  • Page 11: Firmware

    Firmware Shell 6 Pepperl+Fuchs VisuNet Remote Monitors (RMs) and Box Thin Clients (BTC) are industrial- grade thin-client solutions that provide a simplified, modern user interface for operators. The firmware of an RM, called VisuNet RM Shell, enables users to easily access applications that run on a host system (e.g., workstation PC or server) via Ethernet.

  • Page 12: Technical Data

    BTC22-* Product Description The Shell 6 manual describes the features and functions of VisuNet RM Shell 6 in detail. Technical Data Note The standard version of the BTC22 is BTC22-NA-1BA1-NN0. Hardware Processor Intel® Elkhart Lake Atom x6413E 8 GB DDR4 Mass storage 64 GB eMMC Supply...
  • Page 13 BTC22-* Product Description Ambient conditions Operating temperature Temperature classes: A: Industrial temperature grade 0°... 55° C (32 ... 131 °F) Storage temperature -20 ... 60 °C (-4 ... 140 °F) Relative humidity ≤ 95% at 40°C (non-condensing acc. to EN 60068-2- Shock resistance 40 g (11 ms) when operating Vibration resistance...

  • Page 14: Dimensions And Nameplates

    BTC22-* Product Description Dimensions and Nameplates Dimensions 4.5 (2x) 34.9 10.4 215.7 M3 4 mm (4x) Figure 3.3 BTC22 dimensions...
  • Page 15 BTC22-* Product Description Labels The following labels are attached to the BTC22. Nameplate Operator needs consult this manual, all warnings as applicable need to be taken into consideration. Hot surface Certificate of Authenticity (COA) The data can be found on the product marking and on the COA label. The product marking is located on the side of the device.

  • Page 16: Installation

    BTC22-* Installation Installation Mounting Warning! Installation! The device must be installed by competent personnel in accordance with the instructions. All applicable laws and regulations must be carefully observed. Preparation for Installation Check the package contents and all accessories ordered for completeness and signs of dam- age.
  • Page 17 BTC22-* Installation Figure 4.2 Vertical mounting Danger! Ambient conditions! Do not operate the device outside the specified ambient temperature. Warning! Hot surface! The surface of the device may become hot during operation.
  • Page 18 BTC22-* Installation DIN Rail Mounting Following tools and installation materials required: - Screwdriver, - 4 anchors, - 4 screws (included in scope of delivery). Attach the DIN rail adapter to the back of the BTC22. Use the thread on the bottom of the BTC22 to secure the adapter.
  • Page 19 BTC22-* Installation There is a movable clamp on the top of the DIN rail adapter. Install the BTC22 at a slight angle with the movable clamp over the DIN mounting rail. Apply light pressure to pull the BTC22 downward and clamp the adapter into the rail. Figure 4.4...
  • Page 20 BTC22-* Installation Figure 4.5...
  • Page 21 BTC22-* Installation Wall Mounting Caution! Insufficient load capacity! If the mounting surface for wall and vertical mounting does not have sufficient load capacity, the device may fall and be damaged. It is the responsibility of the installer to select a suitable location with sufficient strength for the equipment.
  • Page 22 BTC22-* Installation Figure 4.7 Installation diagram VESA Mounting Attach the VESA fixture (100 x 100 mm or 75 x 75 mm) to the VESA arm or the back panel of the monitor (using the screws provided by the monitor manufacturer). Figure 4.8...
  • Page 23 BTC22-* Installation Figure 4.9 Danger! Ambient temparature range Warning. The ambient temperature range needs to be taken into consideration for use in hazardous locations.
  • Page 24 BTC22-* Installation Figure 4.10 Secure the BTC22 to the VESA fixture using the supplied screws.

  • Page 25: Electrical Connection

    BTC22-* Installation Screw M4, tightening torque: 0.7 ± 0.1 Nm Figure 4.11 Electrical Connection Power consumption at 19 V supply voltage: • Maximum load: 33 W (2x FHD Monitore, CPU full load, 14W USB loads) • Normal operation: 18.5 (2x FHD Monitore, CPU full load, Mouse, Keyboard) Commissioning Remove the dummy plugs from the ports where connections are to be made.

  • Page 26: I/O Connection

    BTC22-* Installation I/O Connection Connnections should be mechanically secured by e.g. the "yellow" cable retainer and/or the screws for each type of connection. Figure 4.12 BTC22 ports, front Figure 4.13 BTC22 ports, rear Port Overview Num- Interface type Description Front Antenna opening x 2 Dummy plug antenna connections, one on the left and (dummy plug)
  • Page 27 BTC22-* Installation Num- Interface type Description Audio Line output x 1 Symbol On/off switch Back Ground connection Not required for standard installations Power plug 5.5 x 2.5 mm DC jack bush with locking mechanism (M8 screw) 12 VDC to 28 VDC Polarity USB 3.1 (Gen 1) x 2 RS-232/RS-485 port with RJ45 connector x 1...
  • Page 28 BTC22-* Installation RJ45 Port RS-232 Pinout Figure 4.14 RJ-45 RJ-45 DSUB DE-9 Description Data Carrier Detect Received Data (E) Transmitted Data (A) Data Terminal Ready Ground Data Set Ready (E) Request to Send (E) Clear to Send (E) RJ45 Port RS-485 Pinout Figure 4.15 RJ-45 RJ-45...
  • Page 29 BTC22-* Installation RJ45 Port RS-422 Pinout Figure 4.16 RJ-45 RJ-45 DSUB DE-9 COM_POWER (Jumper RS-422_TX- option) RS-422_TX- RS-422_TX+ RS-422_RX- RS-422_RX+ RS-422_RX- RS-422_TX+ RS-422_RX+ COM_POWER (Jumper option) RJ45 Port Figure 4.17 RJ45 pinout with LED display Type Color Transceive Data+ WH/OR Transceive Data- OR/WH or Receive Data+...
  • Page 30 BTC22-* Installation LED Indicator Type Description Right LED Yellow Off – No Connection / No Link Yellow On – Connection / Link Established Yellow Flashing – Connection / Link Established with Data actively being transmitted Left LED LED Off – 10 Mbps Speed detected Green On –...
  • Page 31 BTC22-* Installation USB Ports 1 2 3 4 Figure 4.19 USB 2.0 Type Description USB_P5V_- +5 V (fused) fused (A) USB_D0M Data- (I/O) USB_D0P Data+ (I/O) USB_GND 9 8 7 6 5 1 2 3 4 Figure 4.20 USB 3.0 Input/out- Type Description...
  • Page 32 BTC22-* Installation USB Type C 3.2 Pinout Figure 4.21 USB Type C 3.2 TX1+ TX1- VBUS SBU1 VBUS RX2- RX2+ TX2+ TX2- VBUS SBU2 VBUS RX1- RX1+...
  • Page 33 BTC22-* Installation Ethernet Port Figure 4.22 Type Description BI_DA+ Bidirectional data A+, input/output BI_DA- Bidirectional data A-, input/output BI_DB+ Bidirectional data B+, input/output BI_DC+ Bidirectional data C+, input/output BI_DC- Bidirectional data C-, input/output BI_DB- Bidirectional data B-, input/output BI_DD+ Bidirectional data D+, input/output BI_DD- Bidirectional data D-, input/output LED Indicator...

  • Page 34: Bios Settings

    BTC22-* BIOS Settings BIOS Settings Caution! Warranty Access to the BIOS is prohibited. Any access to the BIOS is at your own risk and is not covered by the warranty for repairs. Arbitrary changes to BIOS settings may affect device functionality. The BIOS is set according to customer requirements by default.
  • Page 35 BTC22-* BIOS Settings BIOS Setup Menu Figure 5.1 BIOS setup menu—home screen Setting the System Date Use the arrow keys to set the date. Navigate to month, day, and year in sequence. Enter the appropriate value. Press ENTER to move to the next field. Press F10 to save the changes.

  • Page 36: Creating A New Bios Password

    Note After changing, note down the password and keep it in a safe place. Pepperl+Fuchs assumes no liability in the event that the password is lost. If you forget the password, the device must be returned to Pepperl+Fuchs for a complete reset.

  • Page 37: Changing Serial Interface Mode (Rs-232, Rs-485)

    BTC22-* BIOS Settings Changing Serial Interface Mode (RS-232, RS-485) Select Advanced from the BIOS setup page. Figure 5.3 "Advanced" BIOS menu Configuring Advanced Settings Super IO Configuration allows you to view and configure the Super I/O Chip parameters. Select "Serial Port 1 Configuration". Press ENTER. Select Enabled or Disabled.

  • Page 38: Usb Configuration

    BTC22-* BIOS Settings Settings for Serial Port 1 Mode select RS-232 RS-422 RS-422 Termination Resistor RS-485 RS-485 Termination Resistor USB Configuration USB Configuration allows you to view and configure USB parameters. The USB device displays the USB device detected by the BIOS during the power-on self-test. Figure 5.5 Enabling and disabling the USB device Enabling and Disabling the USB Device...

  • Page 39: Boot Configuration

    BTC22-* BIOS Settings Boot Configuration Select Boot from the BIOS setup page. Figure 5.6 "Boot" BIOS menu You can change the following settings on the "Boot" configuration page: • Setup Prompt Timeout: Sets the time period within which the Delete key must be pressed to enter the BIOS at power-on.
  • Page 40 BTC22-* BIOS Settings Enable "Network Stack" to enable network boot. Figure 5.8 Setting Priorities for Boot Options The "Boot" page allows you to set the priority of all boot devices. Using the arrow keys, select the Boot Option Priority you wish to change. Press ENTER.
  • Page 41 BTC22-* BIOS Settings Power Management The system starts automatically when the power supply is turned on. In the event of a power failure, the device will also automatically power up after the power supply has been restored. Can be changed at section "Chipset" --> PCH-IO Configuration --> Power on after power fail Add a screenshot too like BTC14 and BPC.

  • Page 42: Advanced - Booting From Usb Stick

    BTC22-* BIOS Settings 5.4.1 Advanced - Booting from USB Stick Go to the "Advanced" tap Go to USB Configuration If you want to boot with USB stick, USB Mass Storage Driver Support must be set to Enabled. Figure 5.11 Select "Save and exit" or press the F10 key. The system reboots automatically.

  • Page 43: Resetting The Bios To Factory Settings

    BTC22-* BIOS Settings Select "Save and exit" or press the F10 key. Resetting the BIOS to Factory Settings Restoring Default Settings You can restore the system using the following instructions. Use the arrow keys to select Restore Defaults. Press ENTER. Select Yes.
  • Page 44 BTC22-* BIOS Settings Enable Secure Boot. Figure 5.14 S5 RTC Wake Settings Enable system to wake from S5 using RTC alarm. It is used to wake the system at a specific time. Go to the "Advanced" tab Select "S5 RTC Wake Settings" Figure 5.15 Chose between Fixed Time and Dynamic Time and configure the desired settings.
  • Page 45 BTC22-* BIOS Settings Deactivate LAN ports LAN ports can be deactivated Go to the "Chipset" tab. Select "PCH-IO Configuration" and then "PCI Express Configuration". Choose the LAN Port you like to enable / disable and select LANx Enabled/Disabled. Figure 5.16 Disable/Enable the desired LAN port.

  • Page 46: Service And Support

    BTC22-* Service and Support Service and Support For more information about the products described in this document, visit www.pepperl- fuchs.com. Please have the following information ready when contacting your local representative or tech- nical support: • Product name • Serial number of the product •...

  • Page 47: Accessories

    BTC22-* Accessories Accessories Power Supply, Cables, and Connectors Part num- Type code Description 548328 FSP065-RBBN3 AC/DC power supply Input: 100 VAC – 240 VAC, 50 Hz – 60 Hz Output: 19 VDC Maximum current: 3.42 A Connector: 2.5 mm DC socket with locking mechanism Approvals: CE, FCC class B, UL listed, GS, CCC Power cable: 1 x EU type and 1 x US type 548400...
  • Page 48 BTC22-* Accessories Video Cables and Video Adapters Part num- Type code Description 548403 CLUB3D-CAC-1073 Active adapter cable for BTC DisplayPort 1.2 connector to HDMI 2.0 UHD connec- tor (4K at 60 Hz) Cable length: 3 m 548404 CLUB3D-CAC-1056 Passive adapter cable for BTC DisplayPort 1.1 connector to HDMI 1.4 socket Cable length: 0.2 m...
  • Page 49 Pepperl+Fuchs Quality Download our latest policy here: www.pepperl-fuchs.com/quality www.pepperl-fuchs.com © Pepperl+Fuchs · Subject to modifications / DOCT-9043...

This manual is also suitable for:

Btc22-na-1ba1-nn0

Table of Contents