Table of Contents
Advertisement
WCS-PG410
Commissioning
Activating the RS-485 Bus Termination
If the interface module is operated as the first or last physical device in an RS-485 bus or if you
operate one read head on the interface module, a bus termination must be performed on this
interface module.
Figure 4.1
Set the T2 slide switch (1) to "On" to activate the bus termination (150 ).
16
1
RS-485 bus termination
Note
The T1 slide switch (2) has no function and remains in the "Off" switch
position.
2
Advertisement
Table of Contents
