Toro 03611 Installation Instructions Manual page 7

8. Install the rectangle and circular hole plugs in the control panel (Box A of
9. Install the front roof mount onto the left and right braces with hex-head flange bolts (5/16 x 3/4 inch)
and flange nuts (5/16 inch) (Box B of
10. Align the mounting holes on the control panel with the holes in the front roof mount, and secure the control
panel onto the front roof mount by inserting the rivets into their respective holes and pushing the plunger
on each rivet until it is secure (Box C of
11. Tighten all loose fasteners securely.
Figure 5
Figure 5.
Figure 5).
7
Figure 5).
g263110