Toro 03611 Installation Instructions Manual page 6

2. Install the rear roof mount onto the upper part of the roll bar with upper channel mounts, hex-head flange
bolts (5/16 x 3/4 inch), and flange nuts (5/16 inch) (Box B of
Note:
Ensure that the mount is centered on the roll bar.
3. Install the left and right braces onto the left and right sides of the front mount, respectively, with hex-head
flange bolts (5/16 x 3/4 inch) and flange nuts (5/16 inch) (Box C of
4. Install the left and right upper brackets onto the rear roof mount with hex-head flange bolts (5/16 x 3/4
inch) and flange nuts (5/16 inch) (Box D of
5. Attach the left and right upper brackets to the top of the left and right braces, respectively, with hex-head
flange bolts (5/16 x 3/4 inch) and flange nuts (5/16 inch) (Box D of
6. Install the left and right roll bar mounts to the left and right upper brackets, respectively, with hex-head
flange bolts (5/16 x 3/4 inch) and flange nuts (5/16 inch) (Box A of
7. Install the left and right roll bar mounts to the roll bar with side channel mounts, hex-head flange bolts
(5/16 x 3/4 inch), and flange nuts (5/16 inch) (Box B of
Figure
Figure 3).
Figure 4
Figure 4).
6
3).
Figure 3).
Figure 3).
Figure 4).
g263109