Installing Protective Sealings On Connectors - Omnicomm LLS 20230 Installation Manual

Connection
For Omnicomm LLS 20230 sensors the bolt or self-tapping screw may be sealed:
1. Install the bolt or self-tapping screw through a hole in the seal
2. Close the seal cover with a snap
3. Add the seal and cover numbers to the report

Installing Protective Sealings on Connectors

1. Put the sealing wire through the holes in the connectors and in the rotary seal
2. Twist the seal tab to tighten the wire
3. Tear the seal tab off
21