Yamaha PLG150-VL Owner's Manual page 32

Yamaha virtual acoustic plug-in board owner's manual
Hide thumbs Also See for PLG150-VL:
Table of Contents

Advertisement

VL System Parameters
2
WX Lip Mode
WX-series Wind MIDI Controllers produce pitch bend data ranging from "-16" to "+32" in
response to lip (reed) pressure. The "WX Lip" parameter determines whether these values are
used as is ("Norm"), or expanded to a full "-64" through "+63" range ("Expd"). The pitch bend
data transmitted from the device other than WX-series can be received.
• The "Expd" setting is recommended when using a WX controller in the "tight lip" mode. The "Norm" setting is
• The settings made here is effective only for the PLG150-VL.
Pitch Bend Range When Using a WX Controller in the "tight lip" Mode
3
Breath Mode
The same parameter, Breath Mode, can be found in the VL Part Parameters. The setting done here
is effective only when the Breath Mode in the VL Part Parameters is set to "System."
See page 28 for the detailed information on each parameter
32
............................................................Settings:Norm (Normal), Expd (Expand)
recommended when using the WX controller "loose lip" mode.
When "Norm" is selected
+32
+32
0
-16
-16
Received data
Data sent to the
tone generator
................................................................. Settings: BC/WX, Velocity, Touch EG
When "Expd" is selected
+63
+32
0
-16
-64
Received data
Data sent to the
tone generator
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents