3
Press ENTER.
The following display appears.
(If necessary) Press SELECT button to place the cursor to PLG150-VL.
4
Press ENTER.
The System Parameter Edit display exclusive to the PLG150-VL appears.
5
Press SELECT button to select the parameter you want to edit.
6
Press VALUE button to change its setting.
7
Press the EXIT button to quit editing.
System Parameters
1
Part Assign
Designates the Part to which the VL voice is assigned.
• The VL voices cannot be assinged to several parts at one time since the PLG150-VL is monophonic.
• The SW1000XG doesn't include "Performance" mode.
..................................................Settings: In the XG Mode: 01...16, off
VL System Parameters
In the Performance Mode: 01...04 , off
31