Vl System Parameters - Yamaha PLG150-VL Owner's Manual

VL System Parameters

Modular Synthesis Plug-in System
Five System related parameters for PLG150-VL will be added to the "mother" synthesizer.
The example displays used in the following explanations are all taken from the CS6x.
1
Press the UTILITY button.
The Utility Mode display appears.
2
Turn the PAGE knob clockwise until "PLG150-VL" is shown at the bottom
left of the display.
The VL system parameters will be displayed above the knob C and knob 2.
3
Use knobs C and 2 to select the desired VL System parameter and change
the value.
Once one of the parameters is selected (the arrow cursor appears next to the value), you can also
adjust the value with the DATA knob or the DEC/INC buttons.
XG Plug-in System
Five System related parameters for PLG150-VL will be added to the "mother" tone generator.
1
Press UTIL button to enter the Utility Mode.
The sub-mode menu appears on the LCD.
2
Press SELECT button to place the cursor to PLUGIN.
30
MSTR TG) Vol
Sys 127
PLG1 MIDI)
PLG150-VL
NoteShift
+ 0 +
Clock DevNo
off
Tune
0.0c
1