Gnss Configuration - u-blox EVK-M8L User Manual

Battery
RENATA 3.0 V Li / MnO²
Table 5: Backup battery for EVK-M8L
If the built-in backup battery runs low or is empty after a long storage period, purchase the battery
described above for replacement (refer to section 10 for battery replacements guidelines)
⚠
CAUTION! RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS!

3.3.10 GNSS configuration

The EVK-M8L supports GPS, QZSS, GLONASS, Galileo and BeiDou.
The GNSS to be used can be configured in u-center (View > Messages View > UBX-CFG-GNSS). For
more information, refer to the u-center User guide [6], and the u-blox 8 / u-blox M8 Receiver
Description including Protocol Specification [5]
UBX-20028627 - R01
C1-Public
Type Capacity
CR2450 540 mA
Device description
Operating temperature range
-40 °C to +85 °C
EVK-M8L User Guide
Page 11 of 33