Test Drives - u-blox EVK-M8L User Manual

EVK-M8L User Guide
5

Test drives

The EVK-M8L is now ready for actual test drives.
We recommend recording and archiving the data of your test drives. You can enable additional debug
messages by clicking the Debug button, and then clicking the Record button (see Figure 11). When
prompted to poll for configuration, click Yes (see Figure 12).
Figure 11: The Debug and Record buttons are used for extra messages and debugging / post-analysis
Figure 12: Allow polling and storing of the receiver configuration into log file
UBX-20028627 - R01 Test drives Page 21 of 33
C1-Public