Safe Fleet MVQ-KC320-KIT Quick Installation And Configuration Manual

Routine Maintenance
Cleaning the monitor screen
1. Create a mixture of dish soap or fabric softener and
lukewarm water.
2. Pour the mixture into a spray bottle and seal it shut.
3. Mix the contents together by shaking the bottle.
4. Spray the mixture on the screen and wait 10
minutes.
5. Wipe the screen clean with a soft sponge (do not use
a scouring pad or other abrasive materials).
6. Buff the glass dry using a clean, soft cloth. A
microfiber cloth is acceptable.
Service
If your 32" Public Display Monitor is to be returned for service, please contact the Seon technical support team, provide
the model and/or serial# of your unit, and ask for a Return Merchandise Authorization (RMA) number. An RMA# allows
the support team to better track your product when it comes in for service. Please show the RMA# on the outside of the
package.
ANY PRODUCT SENT WITHOUT AN RMA# MAY BE REFUSED!
Technical Support Documentation
• Email: service@seon.com
Additional copies of this guide, along with other supporting documentation can be
• Phone: 1.844.899.7366
found on the SafeFleet Community (https://community.seon.com/documents/)
Specifications
Feature Specification
Resolution 1920 x 1080
Viewable area 27.47" x 15.44"
(697.68 x 392.26 mm)
Pixel pitch 0.51075mm (H)×0.51075mm (V)
Display colors 16.7M
Aspect ratio 16:9
Brightness 300 nits
Contrast ratio 3000:1
Viewing angle 178°(H) x 178°(V)
Response time 20 ms
Control OSD via rear panel push buttons
or IR remote control
Auto-restart after Yes (monitor returns to its last
power loss state when power is restored)
Video connectors HDMI, VGA, Composite NTSC/
PAL (2 inputs, 1 is Loop-Through)
Power requirement 22 - 26 V DC (10 - 36 V DC using
external voltage converter)
Power consumption ≤ 80 W
Enclosure Steel
Mounting VESA 200 x 200, 150 x 380, 200 x
380, 260 x 380
Operating temperature +32°F to +122°F (0°C to +50°C)
Storage temperature -4°F to +140°F (-20°C to +60°C)
Dimensions 18.5"(W) x 30.5"(H) x 4.7"(D)
(470 x 773.6 x 119.2 mm)
Weight 27.2 lbs (12.34 kg)
Quick Installation and Configuration Guide
Product Overview
This guide covers installation and maintenance of the 32" Public Display Monitor, an industrial-grade color LCD designed for
use in transit vehicles.
Full details are provided for connection to an HDMI source. The monitor also supports a VGA source, two BNC sources
(composite NTSC/PAL) and one loop-through connection.
MVQ-KC320-KIT Package Contents
Component
LCD monitor package:
• 32" LCD monitor
• M8 1.25x25 VESA mounting bracket screws (4 pcs.)
• HDMI cable – 6 ft./1.8 m
• HDMI lock (pre-attached to monitor)
• HDMI lock cable tie wrap (1 pc.)
• Locking power harness – 16.5"/420 mm
• IR remote
External voltage converter 10-36 V DC to 24 V DC
Mounting bracket (includes four M8 1.25x25 VESA mounting screws*)
Power harness kit:
• Two-conductor cable, 16 AWG – 14.5 ft/4.5 m
• Butt splice connectors (8 pcs.)
• Fuses (one 7.5 A and one 5 A)
• Fuse holders (2 pcs.)
* Four extra M8 1.25x25 VESA mounting bracket screws are provided in the MVQ-KC320-KIT Package. Only four are
required.
Installation Diagram
DC 24 V HDMI VGA BNC1
Red:
to output yellow
Black:
to output ground
† Audio In and Audio Out are not
used.
‡ ISP is used for updating firmware
only.
32" Public Display Monitor
Audio In Audio Out
† †
BNC2 BNC-OUT ISP
‡
Red:
OU TP UT
to ACC
Ground
5 A fuse 7.5 A fuse
© Safe Fleet | February 2020 | All rights reserved | Part # 700-1199 R1
Part number
080-1085
085-1117
MVQ-V200-MTPLT
020-1061