On-Screen Display (Osd) - Yamaha DVD-S557 Owner's Manual

Disc Operations

On-Screen Display (OSD)

OSD menu shows the disc playback
information (for example, title or chapter
number, elapsed playing time, audio/
subtitle language), a number of operations
can be done without interrupting disc
playback.
1 During playback, press ON SCREEN.
A list of available disc information
appears on the TV screen.
DVD
MENU
TITLE 02/14
CHAPTER 02/14
AUDIO 5.1CH
SUBTITLE ENG
BITRATE
VCD/SVCD
MENU
TRACK 02/14
DISC TIME 0:49:17
TRACK TIME 0:03:43
REPEAT OFF
BITRATE
2 Press 34 to view the information and
press ENTER/OK to access.
3 Use the numeric buttons to input the
number/time or press
selection, then press ENTER/OK to
confirm.
Playback will change to the chosen time
or to the selected title/chapter/track.
Title/Chapter/Track selection (DVD/
VCD)
1 Press 34 to select [TITLE] or
[CHAPTER] (DVD) or [TRACK] (VCD).
2 Press ENTER/OK.
3 Select a title, chapter or track number
using the numeric buttons.
TIPS: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
12
1 Press 34 to select [TT TIME] or [CH
2 Press ENTER/OK.
3 Enter hours, minutes and seconds from left
1 Press 34 to select [AUDIO], [SUBTITLE]
2 Press ENTER/OK.
3 For Audio and Subtitle,
1 Press 34 to select [REPEAT] or [TIME
to make the 2 Press ENTER/OK.
34
3 Press 34 to highlight your selection and
Time Search (DVD/VCD)
TIME] (DVD) or [TRACK TIME] or [DISC
TIME] (VCD).
[TT TIME] refers to the total time of the
current title, and the [CH TIME] refers
to the total time of the current chapter.
to right using the numeric buttons. (e.g.
0:34:27)
Audio/Subtitle/Angle (DVD)
You can change [AUDIO], [SUBTITLE] or
[ANGLE] if it is available on the disc you
are playing.
or [ANGLE].
Press 34 to highlight your selection and
press ENTER/OK.
OR
For Angle,
Select an angle using the numeric
buttons.
Repeat/Time Display (DVD/VCD)
DISP.].
press ENTER/OK.
Time display (CD)
Each time you press ON SCREEN, the
time display changes as follows;
TOTAL ELAPSED
SINGLE REMAIN
SINGLE ELAPSED
TOTAL REMAIN