AT&T SYSTEM 25 User Manual page 24

Park (Continued)
Parking a Call on the Selector Console
1
2
3
4
Picking Up a Parked Call
1 Lift the handset and listen for dial tone.
2 Dial
3 Dial the PDC on which the call is parked.
20
Press the Group Select and DXS buttons for
one of the Selector Console Park codes. For
example, if one of the codes is 801, press
Group Select button 800 and then press DXS
button 01.
Listen for confirmation tone.
If the call is for another party, dial or page
that person and identify the code on which
the call is parked.
Hang up.
A
NOTE: If the parked call is not answered
within the preset interval, (the default time is
two minutes), the call will return to the
console on the
[ RTN-DA ]
you would any incoming call.
button. Answer it as