Halo Touch - Kwikset Aura Troubleshooting Manual

10

Halo Touch

A
How do I enroll a fingerprint for the lock?
1. Open the Kwikset app with your phone in Bluetooth range (30ft) and with Bluetooth turned on.
2. Select the
3. Select the
4. Enter Name.
5. Select Schedule Type then click Submit.
6. Follow the instructions on the app to enroll your fingerprint.
a. Make sure that the fingers are dry.
b. Adjust the finger to cover the sensor with the middle portion of the finger, especially when enrolling a child's finger.
c. Make sure to lift the finger after each successful fingerprint scan until the app shows 100% enrollment.
NOTE: If you are unable to enroll a specific fingerprint because of fingerprint damage, dry skin, etc.,
please use a different finger.
B
My registered fingerprints are unable to unlock the door?
If your registered fingerprints are unable to unlock the door, you will need to delete the existing
fingerprints and re-enroll the fingerprint into the lock. NOTE: If you are unable to enroll a specific
fingerprint because of fingerprint damage, dry skin, etc., please use a different finger.
1. Select the
2. Select the Name of the person whose fingerprints you need to delete.
3. Tap the
4. Select Schedule Type then click Submit.
5. Follow the instructions on the app to enroll your fingerprint.
a. Make sure that the fingers are dry.
b. Adjust the finger to cover the sensor with the middle portion of the finger, especially
when enrolling a child's finger.
c. Make sure to lift the finger after each successful fingerprint scan until the app shows
100% enrollment.
Technical Support
1-800-327-5625
www.kwikset.com
icon.
icon.
icon.
icon next to the registered fingerprints to delete them.
14 / 14
66450 Rev 01
©2020 Spectrum Brands, Inc.