Using The Sip Server; Registering The Sip Server Information; Notes On Sip Server Operation - Yamaha PJP-50R Owner's Manual

USING THE SIP SERVER

Registering the SIP server
information
If this unit is used in an environment with a SIP server, the
address of the SIP server to be referenced by this unit and
the SIP address of this unit should be registered. If
password authentication is required for accessing the
desired SIP server, it is also necessary to enter the
password. Consult your system administrator for details.
Note
The settings described in this section are not required if this unit
is used in an environment without a SIP server.
1
In the Web menu, click "SIP Server".
The "SIP Server" window appears.
2
In the "SIP Server", click "Enable".
3
In the "SIP Server Name", enter the name or
IP address of the SIP server.
4
If password authentication is required for
accessing the desired SIP server, enter the
authentication password for the SIP server in
the "SIP Server Password".
5
In the "SIP Address", enter the SIP address
to be set to this unit.
Enter the SIP address in the format
"sip:(sip address)".
Example: sip:sipuser@yamaha.co.jp
6
Click "Submit".
The setting is registered and the top window of the
Web menu reappears.
24
Using the SIP Server

Notes on SIP server operation

• To connect a call using the SIP server, the SIP address
of this unit should be registered in the SIP server.
• It is not possible to establish a connection between a
ProjectPhone system that uses the SIP address and a
ProjectPhone system that uses the IP address.
• A global IP address should be assigned to the WAN on
the router side.
VOL
3
1 2 6 1 2
5 MIC MUTE 5
4 9 4
8 8
7 7
0 0
Branch A
Router
Router
VOL
3
2
1 6
5 MIC MUTE
4 9
8
7 0
SIP server
Headquarter
VOL
3
6
MIC MUTE
9
Branch B
Router